|
Home
Metal detectors
Minelab
Bounty Hunter
Beginners
Guide
Contact Us
Delivery
Why Buy From
Us?
Link Page
Site Map
Terms &
Conditions

Telephone Orders
01588 620717
|
Pre-Set
Search Modes - Patch Finding, General & Deep Detecting
- Different search techniques require different settings on your detector to
give maximum performance for best results. If out patch finding over virgin
ground your priority is to cover more ground at a faster sweep speed, you
need a detector with fast target response, sharp clear signal and possibly
fast ground tracking. However, carefully chaining an area that has already
produced nuggets requires an entirely different set of settings. The
GPX-4500 offers three pre-programmed search modes already set up for the
three common search techniques - Patch finding; General detecting and Deep
slow careful detecting. As you get more familiar with all the new functions
of the GPX-4500, you can then program your own preferred settings for each
technique, or search mode.

New Features
NEW TIMINGS so
the GPX-4500 is even more
versatile. Users of the GPX-4000 have learnt just how
valuable it is to have a range of timings
available, to optimise the performance of the detector in various
conditions. The GPX-4500 introduces two new timings, Enhance & Sharp, in
addition to the four found on the previous model. The new Enhance timing is
a powerful feature, similar to the Sensitive Smooth timing, but provides an
improvement in the depth and signal response on small and large targets
alike.
The Sharp timing is more
suited to the quieter soils and provides the most powerful detection field
of all the Soil/Timing options. The Sharp timing can also be used as an aid
to pin-pointing faint signals. Increase in Audio Gain. The design of the
amplifier and the use of the high-quality low noise components ensure the
signal response is clear and crisp, without the added background hum of some
boosters.

Pre-Set Search Modes - Patch
Finding, General & Deep Detecting - Different
search techniques require different settings on your detector to give
maximum performance for best results. If out patch finding over virgin
ground your priority is to cover more ground at a faster sweep speed, you
need a detector with fast target response, sharp clear signal and possibly
fast ground tracking. However, carefully chaining an area that has already
produced nuggets requires an entirely different set of settings. The
GPX-4500 offers three pre-programmed search modes already set up for the
three common search techniques - Patch finding; General detecting and Deep
slow careful detecting. As you get more familiar with all the new functions
of the GPX-4500, you can then program your own preferred settings for each
technique, or search mode.
New Functions
-
Gain
- The Gain function sets the overall performance level of your detector.
In areas where the search conditions are mild, you can increase the Gain,
and in areas that are more difficult it can be reduced. You'll find using
the Gain control in combination with other controls like Timings, Audio
and Ground Balance will enhance performance to the ultimate.
-
Sensitive / Smooth Timing
- The GPX-4500 now has two sensitive options. The all-new Smooth option
dramatically reduces signals from hot rocks and false ground noises, yet
remains highly responsive to small targets. In mild ground conditions, the
Sensitive Timing found on previous GP detectors, now called Extra, is the
preferred option as it will provide greater depth.
-
Ground Balance Type
- In addition to the normal ground balance that we are all familiar with,
the GPX-4500 now has an optional "Specific" ground balance, designed
specifically for use in very hot ground and especially useful with
Mono-loop coils.
-
Response
- We are all familiar with the standard distinctive target signal we get
from small nuggets, it tends to start with a rising tone and then drops to
a lower tone. Because we usually find more small nuggets than large ones,
this target signal is very familiar to us. The response function allows
you to invert the normal target response so that when you're detecting
deep ground for large nuggets, the target response from a big nugget is
easier to hear, as it will be the familiar target signal you're used to
hearing.
-
Motion
- Different sweep speeds demand different software so that the detector
can give the best results. The Motion function allows the operator to
indicate their intended sweep speed to provide the best threshold
stability and target response for that sweep speed.
-
Volume Limit
- Improvements have been made to allow potentially loud signals to be
reduced without any loss of signal strength on weak soft signals, even on
very low settings.
New Lithium Ion Battery

For a mere 870g, Minelab's new lightweight
Lithium-Ion Batteries hold their charge at almost full power for hours more
than conventional batteries and will operate the GPX-4500 for over 12 hours.
The intelligent charging system is self-contained in the robust yet
lightweight aluminium housing, offering very rapid recharge times of 3 to 4
hours, from either the 12v vehicle or Mains adaptor. Best of all, the
available power of the battery can be tested at any time through the LCD
display on the detector.
New
Padded Comforter Belt
Included with the GPX-4500 is a new padded
waist belt that makes wearing the battery harness all the more comfortable,
you won't notice you have it on.
Our Price! £3,999.00
IN STOCK NEXT DAY DELIVERY!!
Evergreen Detectors
The Cann Barn
Mellington
Church Stoke
Montgomery
SY15 6TQ
Tel: 01588 620717
|