-
New
faster and more powerful microprocessor with improved power consumption
makes the Explorer SE more responsive. Spend more time detecting; less time
programming and recharging.
-
New menu structure giving easier access to key functions makes Explorer SE
programming a breeze, Fast learning curve; Intuitive, easy to learn user
interface.
-
New
audio modulated pinpoint mode making target size and depth identification
more reliable. Save valuable time recovering targets.
-
Simplified Iron Mask coordinates 0-31 with full ferrous discrimination
capability. Easy correlation of Iron mask settings with digital readout
values; more user friendly function; Simplifies use of Iron mask; make
better use of Iron mask function.
-
New
audio tone settings with new Pitch Hold mode for picking up even the
faintest of target signals. Improve recovery rate for the smallest or
deepest of good targets.
-
New
Quickstart settings make the learning curve on the Explorer SE a more
rewarding one.
-
New
finer threshold and volume adjust controls. Fine tune Threshold and Volume
to perfectly match operating conditions. More accurate and comfortable
settings.
-
lmproved Threshold stability in noisy/trashy environment. Less false
signals; cover more ground faster.
-
Larger target coordinates in Digital screen and improved menu fonts. Easy
to read user interface.
-
lmproved weight and balance with new lightweight waterproof coil;
Comfortably detect for longer periods of time without fatigue.
Incredible
Depth-
The frequency range of 1.5 kHz to 100 kHz
is the REAL horsepower behind the Explorer SE's world famous target depth...
here's WHY:
The lower the frequency, 1.5 kHz for example, the deeper the signal travels.
And, the higher the frequency, 100 kHz for example, the more sensitive the
signal is to smaller objects closer to the surface.
Simple Physics right??- Read
on...
Treasure Targets in the ground respond differently to
different frequencies--making signals stronger or weaker depending on HOW
much a frequency "excites" the target. If you only have a limited frequency
range like other brands, you're limiting yourself to what you may find. You
could be walking over VALUABLE targets you don't even know are there!
(Can you trust the frequency range of your
current detector?)
The Explorer SE combines
the best of both worlds- Frequency RANGE
and DEPTH! When you're hunting with an Explorer SE, you can be sure
you have the most powerful treasure hunting detector in the world.
You'll have the technological edge other brands only dream of.
POWERFULLY
ACCURATE-
Multiple frequencies operating simultaneously sends and receives
much more information to the
Explorer SE than a standard 1 or 2 frequency VLF detector. This information
is then processed by the Explorer SE's NEW
2nd Generation software to provide the world's most accurate
discrimination . That means you don't have to waste time digging
trash! The Explorer SE's microprocessor eliminates the bad effects on depth
"ground conditions" may cause.
SIMPLE yet incredibly VERSATILE-
Beginners will appreciate the Explorer SE's "turn on and go" simplicity.
Just turn it on, set your threshold, press noise cancel, and you’re ready to
hunt in settings optimized for virtually any condition. Advanced users will
love the power to customize countless programs to suit YOUR treasure hunting
needs.
|
Transmission Technology |
Full Band Spectrum (FBS) 28 Simultaneous
Frequencies ranging from 1 .5kHz - 100kHz |
|
Number of Frequencies |
28
Frequencies bombarding the ground with signals ranging from 1.5kHz to
100kHz! |
|
Microprocessor |
New technology processor - faster and more powerful |
|
Software |
3rd Generation Software - improved user interface |
|
Ground Balance Modes |
Auto Ground Compensation - Advanced Digital Filtering |
|
Target Identification |
2
Dimensional Smart find - Size/Conductivity and Ferrous |
|
Audio Tone Identification |
Constant to Multi-tone; customizable Conductivity / Ferrous |
|
Audio Tone Settings |
3:
Long, Smooth, Pitch Hold |
|
Discrimination |
2
Dimensional Smart find Discrimination |
|
Iron
Mask |
Simplified Iron Mask coordinates 0-31 with full ferrous
discrimination capability |
|
Depth Indicator |
Yes; Now also updates in pinpoint mode |
|
Sensitivity Adjustment |
2:
Semi-Automatic & Manual 1-32 |
|
Noise Cancel |
Automatic & Manual |
|
Pinpoint |
Non-motion modulated audio for improved target size
and depth identification |
|
Low
Battery Audio Alarm |
Yes |
|
Batteries |
1600 mAh NiMH or Alkaline batteries |
|
Coil |
Lightweight 10.5” Double D (DD) waterproof coil |
|
Visual Display |
64
x 128 pixel LCD panel with improved graphics |
|
Headphone Input |
.25 inch 100 Ω Stereo Jack |
|
Threshold |
Finer adjust level; improved stability in high-trash |
|
Recovery Speed |
Selectable (Fast &
Deep) |
